What is the ToolKit series?
What's New?
The RP-97 ToolKit
The Reservoir ToolKit
The Production ToolKit
The Economic ToolKit
Purchase the ToolKit
ToolKit Tips
Contact Integrity Consulting
|
The RP-97 ToolKit
- BINGHAM
- Calculates rheology parameters (based on Fann Viscometer data) and finds
friction pressure losses when displacing mud or cement using a Bingham
plastic flow model.
- BRINE-0,1,2,3
- Determine the required amounts of salt (volume or weight) to mix various
salt water solutions for completion or work over fluids.
- DARCYH
- Darcy flow equation for a horizontal gas well with calculations made from
flowing tubing pressure.
- DARCY2H
- Darcy flow equation for a horizontal gas well with calculations
made from pressure at the formation face.
- DARCYOH
- Darcy flow equation for a horizontal oil well.
- EFF_RW
- Effective wellbore radius and skin factor calculation for a horizontal
well.
- FLD_BING
- Calculates fluid displacement and pressure losses when pumping mud or
cement assuming a Bingham plastic flow model.
- FLD_PLAW
- Calculates fluid displacement and pressure losses when pumping
non-Newtonian fluids or salt water assuming a Power Law plastic flow model.
- GAS_I&O
- Calculates inflow performance of gas wells using real gas pseudo pressures
and outflow performance for given tubing string based on Gray Gas/Condensate
vertical flow program.
- GRAY_GAS
- Vertical flow correlation for gas wells. Uses Gray gas/condensate
correlation to determine pressure changes with depth and flowing bottom hole
pressure for entrained fluids, fluid acceleration, temperature gradient, and
non-hydrocarbon gas components.
- HOR_OIL
- Steady-state oil productivity of a horizontal well as calculated by
Borisov, Giger, and Joshi.
- HOR_OIL2
- Steady-state productivity of a horizontal oil well with effects of
different vertical and horizontal permeabilities.
- OIL-BHP
- Vertical three-phase flow correlation for oil wells.
- OIL_I&O
- Calculates inflow performance of an oil well using Vogel IPR and outflow
performance curve data for flowing or gaslifted wells based on a modified
Ros correlation.
- POWERLAW
- Calculates rheology parameters (based on Fann Viscometer data) and finds
friction pressure losses when displacing mud or cement using a Power Law
plastic flow model.
- SPIN_ANL
- Calculates flow rate, water holdup, slip velocity, water rate and oil rate
from a combination spinner-flowmeter and gradiomanometer production logging
survey.
- WELLFLOW
- Calculates and plots flowing oil well choke performance based on the work
of Gilbert and Ros. Similar work was presented by Poettmann and Beck.
Do you have questions about the ToolKit
programs? Please contact us via e-mail, phone, fax, or
postal mail.
Ready to buy? Visit the ToolKit
purchase page for pricing and ordering information.
|